Chevy GMC Truck: CV Axle Replacement Tip how to prevent shaft from turning while torquing the bolts
DIY hack for fuel tank removal! How to empty fully with no spills or damaged paint!
How to unload or load your motorcycle from a truck without killing yourself!
Why to replace cylinder studs. Have you put much thought into what you reuse?
Do you need to torque small fasteners? Here's how and why!
How to remove a stuck, rusty or damaged flare nut or line nut.
Kawasaki Vulcan oil changes. Do you know about the screen?
Do steering stem grease zerks work? The good and the bad about grease zerks.
Tips for removing a fairing to make installation a breeze! Demo: Harley Ultra Street glide Electra
How to read motorcycle tire date codes. Do you know the date your tire was manufactured?
How to remove a rear tire without removing the exhaust system!
Could this engine really have been assembled wrong 36 years ago? Shaft drive shims smashed!
Why techs are always getting blamed for stripped fasteners and how not to get the finger blame!
How to remove small stripped screws and fasteners! Demo: Stripped Master Cylinder Screw
How to properly torque a Harley Davidson cylinder head. Tips for all bolts!
How to route cables and wires just as the manufacturer designed.
How to remove a stripped screw, bolt, allen with the SnapOn 5FC Pliers!
Does the direction of an oil seal "always" face the same way? Check out this flipped Suzuki example!
How are wheels and tires falling off cars, trucks, and semis so often?
What causes a battery case to leak acid? Demo on a Yamaha VMAX
Why do a compression test with the lights out?
How to check a draining battery. The Parasitic Draw Test
How to load test a vehicles battery with the starter! And the traditional tool way!
Tech Tip of the Day: Creating witness marks for collecting "proof"
Tech Tip of the Day: Make it better than when it came in.
Witness Marks: Are you catching the evidence right in front of you?
Every Mechanic Series: Harley lock tabs on inner primary bolts and correct usage of lock tabs!
Why are holes sometimes not used? Wrong part? Does it matter?
Intro to Skills Every Mechanic Should Know
A good (and funny) example of why you MUST check your work after a repair!
Doing fork seal replacement without special tools tips! Gain an extra set of hands!
How to test a starter solenoid. Example of a bad one easy to miss if not tested this way!
How to test verify electrical connector integrity (before volt drop testing)
EM Series: How to fix a misaligned hole and why you should always test fit parts!
Why you should buy brand name sprockets! Check out these brand new BAD parts!
How to "save the day" using a Back Tap to restore a damaged spark plug hole and threads
Tips for oil filter removal and installation. How to remove a stuck oil filter!
Will extensions change your torque wrench reading? Proof and the answer!
Have you ever fought an axle removal or installation? This may be why.
Problems new techs have using stick on wheel weights! Learn from Road Racers!
Proof what your manual says about torque extensions (crows feet) is true!
Never trust the last mechanic! How to avoid getting burned!
How to pull a piston wrist pin Motion Pro Deluxe P/N 08-0472
Part 2 : How to do a cylinder leak down test with SMOKE to "see" the loss.
Part 1: How to do a cylinder leak down test to "hear" the loss. Traditional Method
How to do a compression test. BONUS TIP: How to test the tool! Demo on: DRZ400 Engine Test
How witness marks on parts yell out to mechanics! Every Mechanic Should Know This Series
EVERY MECHANIC SERIES: The Purpose of Bodywork / Parts Collars Dowels
Should you repair or replace? What the service manual doesn't tell you!
How and why to chamfer 2 stroke cylinder after boring. It's not an option!